Brother MFC-8910DW manual 142

Level 1	Level 2	Level 3	Level 4	Level 5	Options	Descriptions	Page
7.Network	1.TCP/IP	1.Boot Method	—	—	Auto*	Chooses the	See .
(MFC-8510DN)					Static	BOOT method that
						best suits your
					RARP	needs.
					BOOTP
					DHCP
		(IP Boot	—	—	00003*	Specifies the
		Tries)			[00000-32767]	number of
						attempts the
						machine will try to
						obtain an IP
						address when the
						Boot Method is
						set to any setting
						except Static.
		2.IP Address	—	—	[000-255].	Enter the IP
					[000-255].	address.
					[000-255].
					[000-255]
		3.Subnet Mask	—	—	[000-255].	Enter the Subnet
					[000-255].	mask.
					[000-255].
					[000-255]
		4.Gateway	—	—	[000-255].	Enter the Gateway
					[000-255].	address.
					[000-255].
					[000-255]
		5.Node Name	—	—	BRNXXXXXXXXXXXX	Enter the Node
						name.
						(Up to 32
						characters)
		6.WINS Config	—	—	Auto*	Chooses the WINS
					Static	configuration
						mode.

See Network User's Guide.

The factory settings are shown in Bold with an asterisk.

LDAP, Internet Fax and Scan to E-mail Server functions are available as a download.

 To use these functions, please download the necessary software from our web site, the Brother Solutions Center at http://solutions.brother.com/.

Level 2 menus inside parentheses appear if you download IFAX/E-mail options to your machine.

134