WSW22 (ECM and caller ID setting)
Selector | Function |
| Setting and Specifications | |||
No. |
| |||||
|
|
|
|
| ||
|
|
|
| |||
1 | ECM* in sending | 0: ON | 1: OFF | |||
2 | ECM* in receiving | 0: ON | 1: OFF | |||
3 | Call Waiting Caller ID | 0: ON | 1: OFF | |||
4 | Not used. |
|
|
|
| |
|
|
|
|
|
| |
5 |
| 0: | 0% | 1: | 8% | |
Acceptable TCF bit error rate (%) | 0: | 0% | 1: | 4% | ||
|
|
|
| |||
(Only at 4800 bps) | 0: | 0% | 1: | 2% | ||
8 | ||||||
| 0: | 0% | 1: | 1% | ||
|
| |||||
|
|
|
|
|
| |
* ECM: Error correction mode
NOTE: Selector 3 is applicable to the U.S.A. versions only.
NOTE: Selectors 5 through 8 are applicable to the Chinese, Taiwanese and Asian versions only.
•Selector 3: Call Waiting Caller ID
Setting this selector to "0" allows the user to decide whether or not to interrupt the current call when a new call comes in. If Call Waiting Caller ID service is available in the area and the user subscribes to it, he/she can see information about his/her incoming call.
•Selectors 5 through 8: Acceptable TCF bit error rate (%)
Setting two or more selectors to "1" produces addition of percent assigned to each selector. If you set selectors 7 and 8 to "1," the acceptable TCF bit error rate will be 3%.
V - 35
