1.16 Handset Mount,* Hook Switch PCB,* and Dummy Mount**
(*For models except the
(1)Insert the tip of a flat screwdriver into the slits of the handset mount* (or the dummy mount**) and unhook the mount from the main frame.
(2)To replace the hook switch PCB*, you need to disconnect the hook switch harness from the main PCB. (Refer to Section 1.10.)
nReassembling Notes
•When reinstalling the handset mount* (or the dummy mount**), first align the left edge with the main frame and then push down the right edge.
IV - 45