Brother FAX-921, MFC-970MC, FAX-931 service manual Cover Sensor Actuators and Pinch Roller

1.14Cover Sensor Actuators and Pinch Roller

(1)Pull up the cover sensor actuator A and turn it to separate from the actuator B. The spring pops up and the actuator B drops.

(2)Remove the harness guide film.

NOTE: This film is attached to the main frame with double-sided adhesive tape. This film can be usable again as long as it is adhesive.

(3)Press the lock of each pinch roller spring and pull out the springs to the rear.

(4)Lift up the pinch roller.

IV - 43