WSW29 (Function setting 7)
Selector | Function |
|
|
| Setting and Specifications | |||
No. |
|
|
| |||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| No. | 1 | 2 | 3 |
|
|
|
|
|
| 0 | 0 | 0 | : | (A) | |
1 | Compression threshold level for |
| 0 | 0 | 1 | : | (B) | |
| 0 | 1 | 0 | : | (C) | |||
voice signals inputted via the |
| |||||||
| 0 | 1 | 1 | : | (D) | |||
3 | telephone line in the |
| ||||||
| 1 | 0 | 0 | : | (E) | |||
| operation |
| ||||||
|
| 1 | 0 | 1 | : | (F) | ||
|
|
| ||||||
|
|
| 1 | 1 | 0 | : | (G) | |
|
|
| 1 | 1 | 1 | : | OFF | (H) |
|
| No. | 4 | 5 | 6 |
|
|
|
|
|
| 0 | 0 | 0 | : | (A) | |
4 | Compression threshold level for |
| 0 | 0 | 1 | : | (B) | |
| 0 | 1 | 0 | : | (C) | |||
voice signals inputted via the |
| |||||||
| 0 | 1 | 1 | : | (D) | |||
6 | handset in the |
| ||||||
| 1 | 0 | 0 | : | (E) | |||
| operation |
| ||||||
|
| 1 | 0 | 1 | : | (F) | ||
|
|
| ||||||
|
|
| 1 | 1 | 0 | : | (G) | |
|
|
| 1 | 1 | 1 | : | OFF | (H) |
7 | Automatic dialing by caller IDs |
| 0: Yes |
| 1: No |
| ||
stored in the memory |
|
|
| |||||
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
8 | Prompt beep for activity report |
| 0: No |
| 1: Yes |
| ||
|
|
|
|
|
|
|
|
|
NOTE: Selectors 1 through 6 are applicable to those models equipped with a
NOTE: Selector 8 is not applicable to the U.S.A. versions.
•Selectors 1 through 6: Compression threshold level for voice signals inputted via the telephone line in the
If voice signals inputted via the telephone line are below the level specified by these selectors, the TAD interprets those received voice signals as no signal, compressing the recording time.
•Selector 7: Automatic dialing by caller IDs stored in the memory
This selector determines whether or not the automatic dialing function by caller IDs stored in the memory (see the Note below) can be accessed.
If it is set to "0," caller IDs stored in the memory can be called up on the LCD by the user function 6- 7 and then pressing the Start key when the desired caller ID is displayed dials the caller automatically.
(Note: The equipment can store a maximum of the latest 30 incoming caller IDs together with the reception date and time in the memory.)
•Selector 8: Prompt beep for activity report
This selector determines whether or not the equipment will beep if the activity report memory area becomes full with 30 records, for prompting you to print out the report. (Printing it out will clear the memory area.)
V - 42
