nPreparation
Prior to proceeding to the disassembly procedure,
(1)Unplug
-the modular jack of the telephone line,
-the modular jack of the curled cord (and remove the handset), and
-the modular jack of an external telephone set if connected. (Not shown below.)
(2)Remove
-the document wire extension,
-the paper wire extension,
-the paper support, and
-the ribbon cartridge.
nHow to Access the Object Component
•On the next page is a disassembly order flow which helps you access the object components.
To remove the separation roller, for example, first find it on the flow and learn its number (
in this case). You need to remove parts numbered 
, 
, 
, 
, 
, 
, and 
so as to access the separation roller.
•Unless otherwise specified, the disassembled parts or components should be reassembled in the reverse order of removal.
IV - 3
