i Using both hands, use the finger holds on each side of the machine to lift the scanner cover (1) into the open position. Make sure that there is no jammed paper left in the corners of the machine.

1

Troubleshooting

j Gently close the scanner cover using the finger holds on each side.

IMPORTANT

•If the paper is jammed under the print head, unplug the machine from the power source, and then move the print head to take out the paper.

•If the print head is at the right corner as shown in the illustration, you cannot move the print head. Re-connect the power cord. Hold down Stop/Exit until the print head moves to the middle. Then unplug the machine from the power source, and take out the paper.

•If ink gets on your skin or clothing immediately wash it off with soap or detergent.

CAUTION

Be careful not to trap your fingers under the scanner cover.

Always use the finger holds provided on each side of the scanner cover when opening and closing it.

Note

Make sure you pull out the paper support until it clicks.

k Re-connect the power cord.

Note

If there is a repeat paper jam, a small

piece of paper may be stuck in the B machine. (See Additional paper jam clear operations on page 88.)

87