Tray use in Fax mode (MFC-J6710DW only)
You can change the default tray the machine will use for printing received faxes.
Auto Select will allow your machine to take paper from Tray #1 first, or from Tray #2 if:
Tray #2 is set to a different paper size that is more suitable for the received faxes.
Both trays are using the same size paper and Tray #1 is not set to use plain paper.
a Press Tray Setting.
b Press a or b to choose Tray Use:Fax. c Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
d Press a or b to choose Complete. Press OK.
Loading paper
Secure Paper Feed mode for Ledger size Short Grain Paper
If your printed pages have smudge problems when using Ledger paper, your paper may be 2 short grain paper. Choose
LGR - Short Grain and set it to On to avoid this problem.
a
b Press a or b to choose General Setup. Press OK.
c Press a or b to choose LGR - Short Grain.
d Press d or c to choose On. Press OK.
e Press Stop/Exit.
Note
•If you are not sure about the type of paper you are using, consult the paper packaging or paper manufacturer for paper specifications.
•Printing will be slower when using the
LGR - Short Grain setting.
25 