Chapter 2
Note
Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause feed problems.
g Close the paper tray cover.
h Slowly push the paper tray back into the machine.
j Pull tray #1 out of the machine. Press the universal guide release button (1) as you slide out the front of the paper tray.
1
i Do one of the following:
If you are using Ledger, Legal or A3 size paper, go to step j.
Note
When you are using large size paper in Tray #2, you may need to extend Tray #1 out over Tray #2 to prevent printed pages from falling off the output tray.
If you are using Letter, Executive or A4 size paper, go to step m.
k Open the output paper tray cover and adjust the paper length guide (1) for the paper.
1
A4
16