Chapter 2
Paper Size and Type (MFC-J6710DW)
To get the best print quality, set the machine for the type of paper you are using.
You can use eight sizes of paper for printing copies: Letter, Legal, Ledger, A4, A5, A3, Executive and 4 × 6 in. (10 × 15 cm) and five sizes for printing faxes: Ledger, Letter, Legal, A3 or A4. When you load a different size of paper in the machine, you will need to change the paper size setting at the same time so your machine can fit an incoming fax on the page.
a
b Press a or b to choose Tray#1 or Tray#2.
Press OK.
c Do one of the following:
If you chose Tray#1, press a or b to choose Paper Type and press
d or c to choose Plain Paper,
Inkjet Paper, Brother BP71, Brother BP61, Other Glossy or Transparency.
Press OK.
Press a or b to choose Paper Size and press d or c to choose Letter,
Legal, Ledger, A4, A5, A3, Executive or 4"x6". Press OK.
If you chose Tray#2, press a or b to choose Paper Size and press
d or c to choose Letter, Legal,
Ledger, A4, A3 or Executive. Press OK.
d Press a or b to choose Complete. Press OK.
e Press a or b to choose Complete. Press OK.
Note
•You can only use plain paper and paper sizes Ledger, Letter, Legal, Executive, A3 or A4 in Tray#2.
•The machine ejects paper with printed surfaces face up onto the paper tray in front of the machine. When you use transparencies or glossy paper, remove each sheet at once to prevent smudging or paper jams.
Tray use in Copy mode (MFC-J6710DW only)
You can change the default tray the machine will use for copies.
Auto Select will allow your machine to feed paper from either Tray #1 or Tray #2, using the paper type and size settings from the COPY key menu.
To change the default setting follow the instructions below:
a
b Press a or b to choose Tray Use:Copy.
c Press d or c to choose Tray#1,
Tray#2 or Auto Select.
Press OK.
d Press a or b to choose Complete. Press OK.
Note
You can change the paper size and tray selection temporarily for the next copy. (See Paper Size on page 57 and Tray Select
24