d Turn the green release lever on the orange protective packing (1) clockwise until it clicks to release the vacuum seal. Then remove the orange protective packing as shown.

f Gently push the back of the ink cartridge marked “PUSH” until it clicks, and then close the ink cartridge cover.

1

1

e Each color has its own correct position. Insert the ink cartridge in the direction of the arrow on the label.

g The machine will automatically reset the ink dot counter.

Note

If you replaced an ink cartridge, for example Black, the LCD may ask you to verify that it was a brand new one (for

example, Did You Change Black). For each new cartridge you installed, press 1 (Yes) to automatically reset the ink dot counter for that color. If the ink cartridge you installed is not a brand new one, be sure to press 2 (No).

If the LCD shows No Ink Cartridge or Cannot Detect after you install the ink cartridges, check that the ink cartridges are installed properly.

CAUTION

If ink gets in your eyes, wash it out with water at once and call a doctor if you are concerned.

68