Brother J6510DW, J6710DW, MFC-J6710DW Loading paper in paper, tray #2 (MFC-J6710DWonly)

Chapter 2

i While holding the paper tray in place, pull out the paper support (1) until it clicks, and then unfold the paper support flap (2).

2

1

Note

Before you shorten Tray #1, take the paper out of the tray. Then shorten the tray by pressing the universal guide release button (1). Adjust the paper length guide (2) to fit the paper size you are going to use. Then put the paper into the tray.

1

B5JIS
EXE	2
LTR
A4

Loading paper in paper

tray #2 (MFC-J6710DW only)

Note

You can only use plain paper sizes Ledger, Letter, Legal, Executive, A3 or A4 in Tray #2.

a Pull the paper tray completely out of the machine.

Note

•If you are using Ledger, Legal or A3 size paper, press the universal guide release button (1) as you slide out the front of the paper tray until it clicks.

•You can check if the length of the tray is adjusted properly by opening the paper tray cover.

1

14