Brother MFC4450 manual Automatic Fax Only Reception Fax Mode, Setting the Ring Delay

MFC 4450/OP-US-5.0

BASIC SETUP TO RECEIVE FAXES RECEIVING FAXES AND OTHER CALLS

Manual Reception (Manual Mode) (Only with an External Telephone Connected to the MFC)

When you set the Answer Mode to manual, you must answer each incoming call yourself. Here is what you should do when using Manual Mode:

If You Get a...	Then You Should...
1. Regular phone call	Talk as you normally would through the handset of the
	externaltelephone.
2. Phone call and	Press Startor press your Remote Activation Code (*51)
requesttosendafax	ontheexternaltelephonewhenyoufinishtalking,
	replacethehandset.
	Note: The sender must also press Start.
3. Faxtone...	Press Startor press your Remote Activation Code (*51)
	ontheexternaltelephone,andreplacethehandset.

Automatic Fax Only Reception (Fax Mode)

You can automatically receive all your faxes in Automatic Fax Reception mode (Fax light is ON). Select this mode by pressing Mode.

Setting the Ring Delay

You can set the number of rings before the MFC will answer the line.

KEYSTOPRESSTHEDISPLAYWILLSHOW:

		09/12/1998			15:25
		O N L I N E
1.	PressFunction.	ENTER		NO.	&	SET
2.	Press6.	6	.TEL	OPTIONS
3.	Press2.	2	.RING	DELAY
		RING		DELAY:02
		SELECT		{ }	&	SET

Receive FAX

6 - 2