Setting the Paper Size
You can use two sizes of paper for printing your faxes and copies- letter and legal. When you change the type of paper you load in the MFC, you will need to change the setting for Paper Size at the same time so your MFC can fit an incoming fax on the page.
1
2
Press Menu/Set, 1, 2. | GENERAL | SETUP | ||
Press | or | to select LETTER | 2.PAPER | SIZE |
or LEGAL. |
|
|
|
|
Press Menu/Set.
3 Press Stop/Exit.
For the next copy and PhotoCapture Center™ only, you can change the paper size to post card size (4" ⋅ 6").
See Paper Size on page
Setting the Date and Time
Your MFC displays the date and time, and prints it on every fax you send. If there is a power failure, you may have to reset the date and time. All other settings will not be affected.
1
2
3
Press Menu/Set, 1, 3. | GENERAL SETUP |
| 3.DATE/TIME |
Enter the last two digits of the year. | DATE/TIME |
Press Menu/Set. | YEAR:XX |
Enter two digits for the month. | DATE/TIME |
Press Menu/Set. | MONTH:XX |
(For example, enter 09 for |
|
September, or 10 for October.) |
|
4
5
6
Enter two digits for the day. | DATE/TIME |
Press Menu/Set. | DAY:XX |
(For example, enter 06). |
|
Enter the time in | DATE/TIME |
Press Menu/Set. | TIME:XX:XX |
(For example, enter 15:25 for 3:25 P.M.) |
|
Press Stop/Exit.
The LCD now shows the date and time you set whenever the MFC is in Standby mode.
INITIAL SETUP 4 - 2