Understanding the Error Messages

Once you are familiar with the types of errors that can occur while you’re using the PhotoCapture Center™, you can easily identify and troubleshoot any difficulties.

When an error message appears on the LCD, the MFC will beep to get your attention.

MEDIA ERROR—This message will appear if you insert a media card that is either bad or not formatted, or when there is a problem with the media drive, or if the DPOF print file on the media card tried to select a .JPG image that is not there. To clear this error, take out the media card.

NO FILE—This message will appear if you select PHOTOCAPTURE and the media card in the drive (slot) does not contain a .JPG file.

OUT OF MEMORY—This message will appear if you are working with images that are too large for the MFC’s memory.

PhotoCapture Center™ Requirements

To avoid error conditions, please remember:

■The DPOF file on the media card must be in a valid format.

■The image file extension must be .JPG (Other image file extensions .JPEG, .TIF, .GIF and so on will not be recognized).

■Walk-up PhotoCaputure Center™ printing must be performed separately from PhotoCapture Center™ operations using the PC. (Simultaneous operation is not available.)

When printing the INDEX or IMAGE, the PhotoCapture Center™ will print all the valid images, even if one or more images has been corrupted. A portion of the corrupted image may be printed.

11 - 17 WALK-UP PHOTOCAPTURE CENTER™