Brother SC-2000 manual Frame only for a layout document, Stretch Center Only

118.htm

Frame (only for a layout document)

●Selecting the [Frame] command in the [Format] menu displays the Frame dialog box, which lets

you select the style of the frame drawn when is clicked. The setting you make remains in

effect until you change it.

●To specify frame settings for a new frame, use the Frame dialog box to specify the settings you want, then position the cursor in the layout and draw the new frame.

● To edit a frame that has already been added to the layout, first use the pointer to double-click

on the frame in the layout, then change the settings in the Frame dialog box. Any settings that you specify are only applied to the selected frame.

Category:

Select the category that contains the frame pattern that you wish to use.

Stretch Center Only

Click this option to select whether ( ) or not ( ) to lengthen and shorten the frame only from the center, so that the images on the ends of the frame are not deformed.

file:///E/insiders/118.htm (1 of 2) [9/26/2007 1:55:31 PM]