130.htm
Larger
Selecting the [Larger] command in the [Change Size] submenu enlarges both the width and height of the
selected objects while maintaining their original height-to-width ratio.
Smaller
Selecting the [Smaller] command in the [Change Size] submenu reduces both the width and height of
the selected objects while maintaining their original height-to-width ratio.
Maximum
Selecting the [Maximum] command in the [Change Size] submenu resizes the selected objects so that
they completely fill the print area.
Maintain Ratio
Selecting the [Maintain Ratio] command in the [Change Size] submenu resizes the selected objects so
that they fill the print area while maintaining their original height-to-width ratio.
BACK NEXT
file:///E|/insiders/130.htm (2 of 2) [9/26/2007 1:55:34 PM]