128.htm

Align (only for a layout document)

Selecting the [Order] command in the [Layout] menu displays the [Align] submenu, which contains seven commands that allow you to align selected objects.

Note:

The commands in the [Align] submenu are available only if more than one object is selected.

Left

Selecting the [Left] command in the [Align] submenu aligns the left sides of the selected objects.

Horizontal Center

Selecting the [Horizontal Center] command in the [Align] submenu aligns the left/right centers of the selected objects.

Right

Selecting the [Right] command in the [Align] submenu aligns the right sides of the selected objects.

Top

Selecting the [Top] command in the [Align] submenu aligns the tops of the selected objects.

Vertical Center

Selecting the [Vertical Center] command in the [Align] submenu aligns the top/bottom centers of the selected objects.

Bottom

Selecting the [Bottom] command in the [Align] submenu aligns the bottoms of the selected objects.

Align in Relation to Print Area

Selecting the [Align in Relation to Print Area] command in the [Align] submenu specifies whether the selected objects are aligned on the print area ( appears in front of the command) or aligned on each other (no appears). (See the following examples.)

file:///E/insiders/128.htm (1 of 2) [9/26/2007 1:55:26 PM]

Page 118
Image 118
Brother SC-2000 manual Align only for a layout document