Brother SC-2000 manual Draw toolbar, Select button, Text button

56.htm

Draw toolbar

The draw toolbar contains a selection of buttons necessary for selecting objects and for drawing any shape.

(1) [Select] button

●Click this button to change the pointer to .

●	To select an object, move the	pointer on top of the object, then click the
	left mouse button.
●	To move a selected object, move the		pointer on top of the object, then

hold down the left mouse button and drag the mouse.

● To change the size of a selected object, move the pointer over one of the

handles around the object, then hold down the left mouse button and drag the mouse.

● To display a dialog box which can be used to edit an object, move the pointer on top of the

object, then double-click the left mouse button. The dialog box can also be displayed by selecting an object, then clicking the right mouse button and selecting the [Properties] command from the pop-up menu.

(2)[Text] button

●Click this button to change the pointer to (the I-beam pointer) when it is moved into the layout area.

●To create a new text object, position the pointer at the desired position in the layout area, then click the left mouse button. The cursor ( ) flashes in the layout area to indicate that you can now type in text.

Note:

Text is always typed in using the insert mode. You cannot use the insert key on your computer keyboard to switch to the overwrite mode.

●To edit existing text, move the text cursor to the beginning of the text to be edited and while holding down the left mouse button, drag the mouse to highlight the text. You can now edit the

file:///E/insiders/56.htm (1 of 2) [9/26/2007 1:55:19 PM]