Canceling Sending ______________________________

To stop sending before the fax is finished, press [STOP]. Then you may need to open the operation panel to remove the document, see Clearing document jams, p. 58.

Redialing ________________________________________

Manual

To start dialing again, just press [REDIAL/PAUSE]. (When you press [REDIAL/ PAUSE], the previous number dialed with the numeric buttons is redialed.)

Automatic

The FAXPHONE automatically redials twice after the first attempt at sending fails (eg. the line was busy).

The time between redials is two minutes.

You can change the number of redials and the time between redials by changing the TX SETTINGS (see p. 76).

If the FAXPHONE fails to get through after the second redial, the FAXPHONE beeps.

The LCD displays REDIALING while the FAXPHONE is in the redialing process.

REDIALING

To cancel automatic redialing

You can cancel automatic redialing anytime by pressing the [STOP] button. However, when memory is used during sending (including Delayed Sending and Se- quential Broadcasting), you cannot cancel redialing while REDIALING is displayed on the LCD. In this case, wait until dialing begins, then press [STOP] to cancel redialing.

56

Page 65
Image 65
Canon B640 manual Canceling Sending, Redialing, Manual, Automatic, To cancel automatic redialing