![](/images/new-backgrounds/1266878/266878171x1.webp)
Settings
RX SETTINGS
Factory settings are in bold. For instructions on how to change a setting, refer to How to change a setting, pp. 73 and 74.
| Name | Description | Settings |
|
ECM RX | Enable/disable error correction during reception. | ON/OFF |
| |
|
|
|
| |
FAX/TEL SWITCH | Enable/disable FAX/TEL switchover. When ON, this feature |
|
| |
|
| answers calls, and if no fax tone is detected, the FAXPHONE |
|
|
|
| rings to alert you of an incoming call. |
|
|
RING START TIME | Set the duration that the FAXPHONE listens for a fax tone |
| before starting to ring. |
8 seconds (0 to 30)
F/T RING TIME | Set the length of time the FAXPHONE will ring to alert you of | 15 seconds (10 to 45) |
| an incoming call. |
|
F/T SW ACTION | Select the action taken after the F/T RING TIME expires. | DISCONNECT/RECEIVE |
|
|
|
INCOMING RING | When the FAXPHONE is set to Fax Only Mode or Fax/Tel | ON/OFF |
| Mode and an extension phone is connected, set the |
|
| FAXPHONE to ring when it receives a call. |
|
RING COUNT
Set the number of incoming rings before the FAXPHONE | 2 times (1 to 99) |
answers. |
|
|
|
MAN/AUTO SWITCH
RING TIME
MEMORY RX
DRPD
NORMAL RING
DOUBLE RING
Determine if the FAXPHONE switches to document receive mode after the FAXPHONE rings for a specified time when the FAXPHONE is in the manual receive mode.
Set the amount of time the FAXPHONE will ring before switching to document receive mode.
Turn on/off memory receiving of a document.
Enable/disable the Distinctive Ring Pattern Detection (DRPD) feature and assign a setting mode to each ring pattern.
See p. 22.
ON/OFF
7
10 seconds (1 to 99)
ON/OFF
ON/OFF
77