Entering a name _________________________________
Whenever you register a fax number or a telephone number, you can assign a name to that number. To enter a name from the operation panel, you use the numeric buttons to create alphanumeric characters.
Each button has a certain letter group plus a digit assigned to it; an uppercase set followed by a lowercase set of characters and then a digit. Each press of the button steps to the next character in the group.
Use the chart below to determine which number to press for each character:
To enter | Press this numeric button |
0 | 0 |
1 | 1 |
|
|
ABCabc 2 | 2 |
DEFdef 3 | 3 |
|
|
GHIghi 4 | 4 |
JKLjkl 5 | 5 |
MNOmno 6 | 6 |
PQRSpqrs 7 | 7 |
TUVtuv 8 | 8 |
|
|
WXYZwxyz 9 | 9 |
# | |
& + ( ) [ ] { } < > |
|
❚First press the numeric button corresponding to the character you want.
❚Press the numeric button repeatedly until the character you want appears in the display. For example, to enter BIG 1:
1Press the appropriate numeric button repeatedly until the desired character appears.
B
Press 2 twice.
2The next character is in a different group, so simply press the new group’s numeric
repeatedly to display the desired character.
BI
Press 4 three times.
3The next character is in the same group, so press [] to move the cursor to the right first. Then press the numeric button repeatedly.
BIG
Press [] once. Then, press 4 once.
4The next character is a space. Simply press [SPACE].
BIG _
Press [SPACE] once.
34