Adding Marks while Recording MXF Clips

Adding Marks while Recording MXF Clips

When recording on a CF card, you can flag an important shot in a clip by adding a “shot mark” (!). There are two types of shot marks, shot mark 1 (") and shot mark 2 (#), and you can add either or both types to a single

102clip. You can also add an OK mark ($) or check mark (%) to the entire clip to flag clips you want to set apart. You can add all four types of marks remotely using the Wi-Fi Remote application.

When the camera is in mode, you can add or delete shot marks (A138). You can also display an index screen of all the shot marks (A137), allowing you to find a particular scene in a clip more quickly.

Operating modes:

Adding Shot Marks while Recording

To add a shot mark to a clip while recording, you must first set in advance an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2].

1Set an assignable button to [Add Shot Mark 1] or [Add Shot Mark 2] (A111).

•To add both shot marks, set one assignable button to [Add Shot Mark 1] and another assignable button to [Add Shot Mark 2].

2 While you are recording, press the assignable button at the beginning of the shot you wish to mark.

•A message indicating the short mark will appear and the selected shot mark will be added to the current frame of the clip.

•You can press the button again to add another shot mark. Up to 100 shot marks ("and #marks combined) can be added to a single clip.

Remote Operation Using Wi-Fi Remote

After completing the necessary preparations (A51) you can set a shot mark ("or #) remotely from a Wi-Fi- enabled device using the Wi-Fi Remote application.

1While recording a clip, press [SHOT MARK1] on the Wi-Fi Remote screen to set a shot mark 1 or [SHOT MARK2] to set a shot mark 2.

•[Shot Mark1] or [Shot Mark2] will be displayed on the Wi-Fi Remote screen and the shot mark will be applied to the clip.

2 Press ^to close the message.