[Off]

Special Recording Modes

 

Activating Interval Recording Mode and Recording

[ 4K/2K/MXF Setup]

1

Open the [Special Rec] submenu.

 

106 2

[ 4K/2K/MXF Setup] >[Special Rec]

[Special Rec]

 

Select [Interval Rec] and then press SET.

 

 

 

 

 

• [INT STBY`] (during 4K and 2K modes) or [INT STBY] (during MXF mode) appears at the top of the screen (with [INT] flashing).

3Press the START/STOP button to begin recording.

•The set number of frames are recorded automatically at the set interval.

•The tally lamp illuminates.

•[INT] changes to [ÜINT] while recording frames.

4Press the START/STOP button again to stop recording.

•All of the recorded frames are joined together into one clip.

•[INT STBY`] (during 4K and 2K modes) or [INT STBY] (during MXF mode) appears at the top of the screen (with [INT] flashing).

•The tally lamp goes out.

NOTES

•You can use only one special recording mode at a time.

•While recording, you cannot change the interval or number of frames.

•Some frames at the point the recording was stopped may be recorded and added to the end of the clip.

•Interval recording mode will be deactivated if the special recording mode is changed or turned off. It will be deactivated also if you change the video configuration.

•During this special recording mode, the running mode of the time code (A84) can be set to [Rec Run] or [Regen.]*. The time code advances by the number of frames recorded. If the running mode of the time code (A84) is set to [Free Run] or the time code is input from an external source, the running mode will switch to [Rec Run] during special recording mode. When special recording mode is deactivated, the running mode will return to its previous setting.

•During special recording mode, the time code signal will not be output from the MON. terminals, TIME CODE terminal or HD/SD SDI terminal. During 4K and 2K modes, the time code signal will be output from the 3G-SDI terminals.

* During MXF mode only.

Frame Recording Mode

Set the number of frames in advance. We recommend operating the camera remotely or stabilizing the camera, for example, on a tripod. Sound is not recorded in this mode. During 4K and 2K modes, MXF clips will not be recorded simultaneously on a CF card even if a card is inserted in the camera.

Operating modes: