Connecting to an External Monitor
Options
[Letterbox]: The picture is reduced in size while maintaining the aspect ratio and black letterbox bars are added to the top and bottom of the image so that the picture has a 16:9 aspect ratio.
[Squeeze]: The image is squeezed from the left and right so that the entire image fits within the screen. The image
146will appear normal if the external monitor also has a 1.896:1 aspect ratio.
[Side Crop]: The left and right sides of the image are cropped so that the central part of the image fits within the screen.
Original 4K or 2K image | [Letterbox] setting | [Squeeze] setting | [Side Crop] setting |
(1.896:1) |
|
|
|
NOTES
•For [Letterbox], because the camera uses a simple conversion process vertically, diagonal lines may appear jagged.
•For MON. terminal output during 4K mode, because the camera uses a simple conversion process, color shifting may be visible.
•If you set an assignable button to [Resize MON. Output] (A111), you can press the button to switch the resizing method.
Applying a LUT to Canon Log Gamma
When checking video recorded with Canon Log gamma on an external monitor connected to a MON. terminal, you can apply a LUT.
1Open the [Select] submenu (under [LUT]).
[
4K/2K/MXF Setup] >[MON. 1 & 2] >[Select]
2Select the desired option and then press SET.
3 Press the LUT button.
•The selected LUT will be applied.
Options
[Rec. 709]: Converts to a color space based on the
[Wide DR]: Converts to a wide dynamic range.
[
4K/2K/MXF Setup]
[MON. 1 & 2]
[Select]
[Rec. 709]