Troubleshooting
Shot Mark Error
-Could not add a shot mark. If the message appears in 
mode, try adding the mark again. If that does not work,
add the mark in 
mode after you finish recording. If the message appears in 
mode, turn off the camera and then back on. Then, try to add the mark again.
190 System error
-Turn off the camera and back on again. If this does not solve the problem, there may be a malfunction with the camera. Consult a Canon Service Center.
Temperature too high The fan will be activated
-The camera’s internal temperature has risen while the camera is in 
mode and [Other Functions] >[Fan] is set to [Automatic]. Select [OK] to activate the cooling fan.
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or edited on a computer.