Handling Precautions
•Store battery packs in a dry place at temperatures no higher than 30 °C (86 °F).
•To extend the battery life of the battery pack, discharge it completely before storing it.
192• Charge and discharge all your battery packs fully at least once a year.
Always attach the battery terminal cover.
Do not allow any metal objects to touch the terminals (figure 1), as this can |
| ||
cause a short circuit and damage the battery pack. Attach the terminal cover |
| ||
whenever the battery pack is not being used (figure 2). |
|
| |
The battery terminal cover has a |
| ||
wish to differentiate between charged and uncharged battery packs. For |
| ||
example, with charged battery packs, attach the terminal cover so that the |
| ||
Figure 1 | Figure 2 | ||
Back side of the | Terminal cover attached |
| |
Charged |
|
| |
battery pack | Uncharged |
|
Remaining battery time
If the remaining battery time displayed is not correct, charge the battery pack fully. Still, the correct time may not be displayed if a fully charged battery pack is used continuously in high temperatures or it is left unused for long periods of time. Also, the correct remaining time may not be displayed, depending on the battery life. Use the time shown on the screen as an approximation.
Using higher capacity batteries
You can use the optional
1 Slide down the BATT.OPEN switch and open the battery compartment cover.
2 Push the latch at the bottom of battery compartment.
3 Gently pull out the battery compartment cover.
Regarding the use of
• We recommend using genuine Canon battery packs bearing the Intelligent System mark.
•If you attach to the camera battery packs that are not genuine Canon battery packs, the remaining battery time will not be displayed.