Connecting to an External Monitor
Superimposing Onscreen Displays to Appear on an External Monitor
You can choose to superimpose onscreen displays on the video output from the HD/SD SDI terminal, HDMI OUT terminal or SYNC OUT terminal. Doing so will display the onscreen displays on an external monitor. You must set this function separately for HD and SD output. This setting will not affect your recordings.
Operating modes: 
1 Open the [HD Onscreen Disp.] or [SD Onscreen Disp.] submenu.
mode:
[
4K/2K/MXF Setup]
mode: | 149 | |
[¢Video Setup] | ||
|
[HD/SD Output]
[HD Onscreen Disp.]
[SD Onscreen Disp.]
[
4K/2K/MXF Setup] (in 
mode) or [¢Video Setup] (in 
[Off] mode) >[HD/SD Output] >[HD Onscreen Disp.] or [SD Onscreen
Disp.]
2 Select [On] and then press SET.
•Tappears on the upper right of the screen (when [£LCD/VF Setup] >[Custom Display 2] > [Output Display] is set to [On]).
NOTES
•Onscreen displays will not appear on an external monitor for SD output if [
4K/2K/MXF Setup] (in 
mode) or [¢Video Setup] (in 
mode) >[Resize SD Output] is set to [Side Crop].
•If you set an assignable button to [Onscreen Display] (A111), you can press the button to turn on and off the superimposing of onscreen displays on video output from the camera’s terminals (simultaneously for HD and SD video).