Playing Back MXF Clips

7 Playback operation

 

ÐPLAY

Playback

130

ÝPAUSE

Playback pause

Ô/Ó

Frame reverse/Frame advance

 

F FWD ×

Fast playback*

 

ØF REV

Fast reverse playback*

* The playback speed (x5, x15 or x60) will also appear in the indicator.

9 Relay recording

Appears when a clip begins on one CF card and continues uninterrupted on the other. 5indicates the first part of the recording, 6indicates the middle part(s) and 7indicates the last part.

Playback Controls

When you play back a clip, operate the buttons on camera’s body or on the monitor unit or use the joystick and joystick guide to use fast playback, play back frame-by-frame or skip clips. Refer to the following table.

Available Playback Types

Playback type

Operation

 

Buttons: Press the Øor ×button.

Fast playback

Joystick: During playback, push the joystick up or down.

Repeat to increase the playback speed to approximately

 

 

5x J 15x J 60x the normal speed.

 

 

Frame advance/reverse

Joystick: During playback pause, push the joystick up or

down.

 

 

 

Skip to the beginning of

Buttons: Press the Ùbutton.

the next clip

Joystick: Push the joystick right.

 

 

Skip to the beginning of

Buttons: Press the Úbutton.

the current clip

Joystick: Push the joystick left.

 

 

Skip to the previous clip

Buttons: Press the Úbutton twice.

Joystick: Push the joystick left twice.

 

 

 

Return to playback mode

Buttons: Press the Òbutton.

Joystick: Press the joystick itself (SET button).

 

 

 

NOTES

There is no audio during any of the playback types listed in the previous table.

During some special playback modes, you may notice some anomalies (blocky video artifacts, banding, etc.) in the playback picture.

The speed indicated on the screen is approximate.

During frame advance, the time advanced between frames depends on the video configuration used:

0.2 seconds (for 1280x720/24.00P, 1280x720/23.98P or 1280x720/59.94P), 0.25 seconds (for 1280x720/ 50.00P) and 0.5 seconds for other video configurations.

You can press the DISP. button to turn the joystick guide display on and off.