MXF Clip Operations

NOTES

•You cannot copy a clip if either CF card slot cover is open.

•If a clip is being copied to a card that already has a clip with the same number (the last 4 digits in the clip

136 name), then the copied clip will be renamed with the following number.

Deleting Clips

You can delete any clip except those with an $mark. To delete such clips, delete the $mark beforehand.

Deleting a Single Clip

1Select the desired clip and then press SET to open the clip menu.

2 Select [Delete Clip] and then press SET.

•The clip information screen appears and it prompts you to confirm the operation. 3 Select [OK] and then press SET.

•Select [Cancel] instead to cancel the operation.

•While the clip is being deleted, the operation cannot be canceled.

4 When the confirmation message appears, press SET.

Deleting All Clips

1Open the [Delete All Clips] submenu.

[wOther Functions] >[Clips] >[Delete All Clips]

2Select [OK] and then press SET.

•All of the clips (except for clips with an $mark) on the selected CF card will be deleted.

•Select [Cancel] instead to cancel the operation.

•While the clips are being deleted, you can press SET to cancel.

3 When the confirmation message appears, press SET.

[wOther Functions]

[Clips]

[Delete All Clips]

Deleting the User Memo and GPS Information

1 Select the desired clip and then press SET to open the clip menu. 2 Select [Delete User Memo] and then press SET.

• The [Delete User Memo] screen appears and it prompts you to confirm the operation.

3 Select [OK] and then press SET.

•The user memo and GPS information is deleted and the screen changes back to the clip index screen.

•Select [Cancel] instead to cancel the operation.

Copying a Custom Picture File Embedded in a Clip

You can copy the custom picture file embedded in a clip to the camera. A custom picture file embedded in a clip recorded on a CF card with a C300 / C300 PL camcorder can be copied to this camera.

1 Select the desired clip (a clip with the /icon) and then press SET to open the clip menu.

2 Select [Copy /File] and then press SET.