•2Iris: 1/2-stop increments, 1/3-stop increments, fine-tuning

•ISO Speed

1-stop increments: ISO 320, ISO 400 to ISO 12800, ISO 20000

1/3-stop increments: ISO 320 to ISO 20000

•Gain: -6 dB to 30 dB (3-dB increments), 0 dB to 24 dB (fine-tuning in 0.5-dB increments)

•Shutter Speed

Speed (1/3-stop increments, 1/4-stop increments), angle, clear scan, slow, off

•2Lens Peripheral Illumination Correction: Available for Canon EF lenses4

4 Some Canon EF lenses are not compatible with peripheral illumination correction.

•Sensor Sensitivity (MXF mode, ISO 640 (0 dB), 2000 lux, 89.9% reflection)

59.94 Hz mode: F9 (1920x1080 at 59.94i) 50.00 Hz mode: F10 (1920x1080 at 50.00i)

•S/N Ratio (MXF mode, ISO 850, using Canon Log gamma)

54 dB (typical, 1920x1080, 59.94 Hz mode at 29.97P / 50.00 Hz mode at 25.00P)

•Subject Illumination (MXF mode, 24 dB, with a f/1.2 lens)

59.94 Hz mode: 0.30 lux (29.97P, shutter speed 1/30)

50.00 Hz mode: 0.25 lux (25.00P, shutter speed 1/25)

•Size of Photos

1920x1080 pixels, 1280x720 pixels (only when capturing a photo from a clip)

Terminals

•3G-SDI Terminals 1 and 2

BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced, 2.97 Gbps SMPTE 424M, SMPTE ST 425-1

Video:

Resolution: 4096x2160, 3840x2160, 4096x1080, 3840x1080

 

Mode: RAW; RGB, 4:4:4, 12-bit; RGB, 4:4:4, 10-bit; YCC, 4:2:2, 10-bit

 

Frame rate1: 59.94P, 29.97P, 23.98P, 50.00P, 25.00P, 24.00P

Embedded audio, time code (VIT /LT )

1Available frame rates depend on the resolution and recording mode settings.

Specifications

201

•MON. Terminals 1 and 2

BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced, 1.485 Gbps

SMPTE ST 292-1

Video: Resolution: 2048x1080, 1920x1080 Mode: YCC, 4:2:2, 10-bit

Frame rate2: 59.94i, 29.97P/PsF, 23.98P/PsF, 50.00i, 25.00P/PsF, 24.00P/PsF Embedded audio, time code (VITC/LTC), assistance displays3 (magnification, peaking, zebra pattern, onscreen markers)

2Available frame rates depend on the resolution and recording mode settings.

3Magnification is available for the output from both MON. 1 and MON. 2 terminals. Other assistance displays are available for the output from the MON. 1 terminal only.

•HD/SD SDI Terminal

BNC jack, output only, 0.8 Vp-p / 75 Ω, unbalanced, 1.485 Gbps

HD-SDI:

SMPTE 292

 

Video:

Resolution: 1920x1080, 1280x720

 

 

Frame rate4: 59.94i, 29.97 (P/PsF), 23.98 (P/PsF), 50.00i, 25.00 (P/PsF),

 

 

24.00 (P/PsF), 59.94P, 50.00P

SD-SDI:

SMPTE 259M

 

Video:

Resolution: 640x480, 768x576

Frame rate: 59.94i, 50.00i

Embedded audio, time code (VITC/LTC)

4Available frame rates depend on the resolution and recording mode settings.