Using a Tripod with 0.64 cm (1/4 in.) Mounting Screws

To use a tripod with 0.64 cm (1/4 in.) mounting screws, first attach the supplied tripod adapter base to the camera and then attach the tripod to the adapter base.

1 Remove the original TB-1 tripod base from the camera.

• Remove the 4 screws and then remove the base.

2 Attach the supplied tripod adapter base for 0.64 cm (1/4 in.) tripods.

•Firmly screw in the 4 screws. 3 Attach the tripod.

•Firmly screw in the tripod screw.

Attaching the Handle Unit

1 Insert the attachment base at the bottom of the handle unit to the camera’s accessory shoe.

2 Tighten the handle unit’s lock screw while gently pressing it down.

NOTES

• You can use the accessory shoe or the socket for 0.64 cm (1/4 in.) screws on the handle unit to attach a variety of commercially available accessories.

Attaching a Shoulder Strap

Pass the ends through the strap mount and adjust the length of the strap.

IMPORTANT

• Be careful not to drop the camera when attaching or adjusting the shoulder strap.

Preparing the Camera

41