Recording Audio
Activating the Microphone’s Attenuator
If the audio level is too high and the sound sounds distorted, activate the microphone attenuator (20 dB).
961 Open the [MIC Att.] submenu.
[¡Audio Setup] >[Audio Input] >[MIC Att.]
2 Select [On] and then press SET.
[¡Audio Setup]
[Audio Input]
[MIC Att.]
[Off]
Monitoring the Audio with Headphones
Connect headphones* to the ×(headphone) terminal to monitor the recorded audio. You can adjust the headphone volume with the [¡Audio Setup] >[Audio Output] >[Headphone Volume] setting.
*For 50.00 Hz recordings, use commercially available headphones with a cable no longer than 3 m.
Selecting the Audio Channel
You can select the audio channel that is output from the × (headphone) terminal.
Operating modes:
1 Open the [Channel] submenu.
[¡Audio Setup] >[Audio Output] >[ hannel]
2 Select the desired option and then press SET.
Options
[CH1/CH2]: Audio from CH1 is output from the left audio channel and audio from CH2 is output from the right audio channel.
[CH1/CH1]: Audio from CH1 is output from both the left and right audio channels.
[CH2/CH2]: Audio from CH2 is output from both the left and right audio channels.
[All/All]: Audio from CH1 and CH2 is mixed and output from both the left and right audio channels.
×(headphone) terminal
[¡Audio Setup]
[Audio Output]
[Channel]
[CH1/CH2]
NOTES
•If you set an assignable button to [Audio Output CH] (A111), you can press the button to change the audio channel directly.