Video Configuration: Type of Recording, Resolution and Frame Rate
| Video configuration for external recording |
| Video configuration recorded on CF card |
| |||
System priority | Recording mode | Resolution | Frame rate | Bit rate / Resolution | Frame rate |
| |
|
|
| 59.94P |
| 29.97P |
| |
|
|
|
|
| |||
|
|
| 29.97P | 50 Mbps / 1920x1080 |
| 65 | |
|
|
|
|
| |||
| 2048×1080 | 23.98P | 35 Mbps / 1920x1080 | 23.98P |
| ||
|
| ||||||
| 1920×1080 |
| 25 Mbps / 1440x1080 |
|
|
| |
2K | 50.00P | 25.00P | |||||
|
|
|
| ||||
|
| 25.00P |
| ||||
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
|
|
| 24.00P | 50 Mbps / 1920x1080 | 24.00P | ||
|
|
|
|
|
|
| |
| 2048×1080 | 59.94P | 50 Mbps / 1280x720 | 59.94P | |||
| 1920×1080 |
| 35 Mbps / 1280x720 |
|
|
| |
| 50.00P | 50.00P | |||||
|
| ||||||
|
|
|
|
|
|
|
|
Selecting the Resizing Method When Converting to HD Video
When converting 4K or 2K image data with a resolution of 4096x2160, 4096x1080 or 2048x1080 to MXF video with a resolution of 1920x1080, you can select how it will be recorded on a CF card or output from the HD/SD SDI terminal, HDMI OUT terminal and SYNC OUT terminal (only when
1 Open the [Resize MXF Output] submenu.
[ 4K/2K/MXF Setup] >[Resize MXF Output] | [ 4K/2K/MXF Setup] |
2 Select [Letterbox], [Squeeze] or [Side Crop] and then press SET.
• The options are the same as those listed for Selecting the Resizing Method (A145).
NOTES
[Resize MXF Output]
[Letterbox]
• If you set an assignable button to [Resize MXF utput] (A111), you can press the button to switch the resizing method.
•During 4K and 2K modes, the picture output from the
•Because the camera uses a simple resize conversion process vertically, diagonal lines may appear jagged.
Selecting the Video Configuration for MXF Mode
To set the video configuration, select the system frequency, system priority, bit rate and resolution, and frame rate, as necessary. For a summary of the video configuration, refer to the table following the procedures below.
Operating modes: 
Selecting the System Priority |
| ||
[ 4K/2K/MXF Setup] | |||
1 | Open the [System Priority] submenu. | ||
| |||
| [ 4K/2K/MXF Setup] >[System Priority] | [System Priority] | |
2 | Select [MXF] and then press SET. | ||
| |||
• The camera will restart in MXF mode.
[4K]