Preparing Recording Media
•If you set the [wOther Functions] >[Media Access LED] function to [Off], the access indicators will not illuminate.
Initializing the Recording Media
The first time you use any recording media with this camera, initialize it first. You can also initialize a recording media to permanently delete all the data it contains.
47
When initializing an SD card, you can select quick initialization, which clears the file allocation table but does not physically erase the stored data, or complete initialization, which deletes all data completely.
Operating modes: 
1 | Open the [Initialize Media] submenu. | [wOther Functions] |
| [wOther Functions] >[Initialize Media] | |
|
| |
2 | Select [CF A], [CF B] or [SD Card] and then press SET. | [Initialize Media] |
To initialize a CF card |
| |
| ||
3 | Select [OK] and then press SET. |
|
4 | When the confirmation message appears, press SET. |
|
| • The CF card is initialized and all the data it contains is erased. |
|
To initialize an SD card
3 Select [Complete] (complete initialization) or [Quick] (quick initialization) and then press SET. 4 Select [OK] and then press SET.
•If you are using the [Complete] initialization option, press SET twice to cancel the operation while it is in progress. You can use the SD card but all data will be erased.
5 When the confirmation message appears, press SET.
• The SD card is initialized and all the data it contains is erased.
IMPORTANT
•Initializing a recording media will permanently erase all data, including clips with an $mark, protected photos, and custom picture files. Lost data cannot be recovered. Make sure you save important recordings in advance.
•Depending on the SD card, the complete initialization may take up to a few minutes.
NOTES
•While recording on a CF card, you can initialize another CF card in the other CF card slot.
•If you set an assignable button to [Initialize Media] (A111), you can press the button to open the initialization submenu.