MXF Clip Operations
Displaying Custom Picture Settings
When displaying the [Clip Info] screen of a clip that has a custom picture file recorded with it, push the joystick down or turn the SELECT dial down to display the first of three screens with the clip’s custom picture settings ([/Data 1/3] screen). Push the joystick down or turn the SELECT dial down to switch the [/Data 2/3] screen
134J [/Data 3/3] screen J [Lens & Q] screen J [Clip Info] screen.
Adding $Marks or %Marks
If you add an OK mark ($) or check mark (%) to a clip, you can later display an index screen that shows only the clips with an $mark or only the clips with a %mark. Furthermore, you cannot delete clips with an $mark so you can use it to protect important clips.
Adding an $ Mark or % Mark during Playback
To add an OK mark ($) or check mark (%) to a clip during playback or playback pause, you must first set an assignable button to [Add $Mark] or [Add %Mark] in advance.
1Set an assignable button to [Add $Mark] or [Add %Mark] (A111).
•To add both types of clip marks (to different clips), set one assignable button to [Add $Mark] and another assignable button to [Add %Mark].
2During playback or playback pause, press the assignable button to add the clip mark.
•A message indicating the clip mark will appear and the selected clip mark will be added to the clip.
•Adding a clip mark to a clip during playback will pause the playback.
Adding an $ Mark or % Mark from the Index Screen
1Select the desired clip and then press SET to open the clip menu.
2 Select [Add $Mark] or [Add %Mark] and then press SET.
•The clip information screen appears and it prompts you to confirm the operation. 3 Select [OK] and then press SET.
•The screen changes back to the clip index screen and an $mark or %appears next to the selected clip’s thumbnail.
•Select [Cancel] instead to cancel the operation.
NOTES
•A clip cannot have both an $mark and %mark at the same time. When you add a %mark to a clip with an $mark, the $mark will be deleted. Similarly, when you add an $mark to a clip with a %mark, the % mark will be deleted.
Deleting $Marks or %Marks
Deleting an $ Mark or % Mark from a Clip
1Select the desired clip and then press SET to open the clip menu.
2 Select [Delete $Mark] or [Delete %Mark] and then press SET.
•The clip information screen appears and it prompts you to confirm the operation. 3 Select [OK] and then press SET.
•The screen changes back to the clip index screen the selected mark is deleted.
•Select [Cancel] instead to cancel the operation.