Basic Printing

3 Load the paper.

Load Limit Mark

Do not load beyond this Load Limit Mark.

(1) Load the paper

into the Auto

Sheet Feeder with

the print side facing UP.

(2) Align the paper stack

with the right edge of

the Auto Sheet

Feeder.

(3) Pinch the Paper Guide and slide it against the left side of the paper stack.

Set the Paper Guide correctly when printing from the Auto Sheet Feeder. The paper may not feed correctly if the Paper Guide is not set correctly.

z The following paper can be used in the Auto Sheet Feeder.

Paper Size

Standard paper: From 4" x 6" / 101.6 x 152.4 mm to A3+ (13" x 19") size (329.0 x 483.0 mm / 13 x 19 inches)

Non-standard paper: From 89.0 x 120.0 mm / 3.50 x 4.72 inches to

329.0x 584.2 mm / 12.95 x 23 inches

Weight

From 64 gsm / 17 lb to 105 gsm / 28 lb (plain paper except for supported Canon genuine media)

*You can use art paper that is not produced by Canon that is up to 200 gsm / 53 lb.

Do not use paper heavier than this (except for supported Canon genuine media), as it could jam in the printer.

See “Non-Canon Genuine Specialty Paper” of the User’s Guide.

zWhen printing on plain paper (64 gsm / 17 lb), load up to 150 sheets in the Auto Sheet Feeder.

However, the paper may not feed correctly depending on the type of paper and the environment (high temperature / high humidity / low

6