Advanced Printing
Connecting to a PictBridge Compliant Device
To connect a PictBridge compliant device to this printer, use the USB cable supplied with the device.
Do not connect any equipment other than PictBridge compliant devices to the Direct Print Port of the printer. If you do so, electric shock, fire, or damage to the device could result.
z When printing photos with the digital device connected to the printer, it is advisable to use the AC adapter supplied with the device. If you use the device battery, be sure to charge it fully.
zThe Print Head cannot be aligned using the controls of the digital device. The print head alignment can be performed simply by pressing the RESUME/CANCEL button on the printer, or by connecting the printer to the computer and then executing automatic print head alignment. Refer to “Aligning the Print Head” on page 58.
1
2
3
Set up the printer.
Turn on the printer.
See “Turning on the Printer” on page 2.
Load the paper in the Auto Sheet Feeder.
When printing on 14" x 17" / 355.6 x 431.8 mm paper, load paper in the Front Tray.
27