The following operation displays a sub name in the Run-Matrixmode.

!m(SET UP)2(Line)J

!b(List) n!+( [ )a!-( ] )w

(n = list number from 1 to 26)

Though you can input up to 8 bytes for the sub name, only the characters that can fit within the List Editor cell will be displayed.

The List Editor SUB cell is not displayed when “Off” is selected for “Sub Name” on the Setup screen.

kChanging the Data Color

You can change the color of data input into an individual cell or for all of the data input in a particular list.

uTo change the data color in a specific cell

1.Use the cursor keys to move the highlighting to the cell whose character color you want to change.

Be sure to select a cell that already contains input data. You will not be able to perform the next step if you select a cell that does not contain any input data.

2.Press !f(FORMAT) to display the color selection dialog box.

3.Use the cursor keys to move the highlighting to the desired color and then press w.

You also can select an option by pressing the number key that corresponds to the number to the left of the desired option.

3-5