ε-11

Using Advanced Setup

Note

•When you select a channel on the Channel Setup screen, the sampling range of the selected channel appears in the bottom line of the screen.

In the above example, the range of the temperature sensor assigned to CH2 appears on the display.

If the sampling range value is too long to fit on the display, only the part of the value that fits on the display will be shown.

kSample Setup

The Sample Setup screen lets you configure a number of settings that control sampling.

• To configure Sample Setup settings

1.While the Advanced Setup menu (page ε-8) is on the display, press c(Sample).

•This displays the Sample Setup screen, with the “Mode” line highlighted, which indicates that you can select the sampling mode.

2.Select the sampling mode that suits the type of sampling you want to perform.

To do this:

Press this key:

To select this
mode:

 

 

 

 

 

Graph data in real-time as it is sampled

1(R-Time)

Real-time

Perform sampling of high-speed phenomena

2(Fast)

Fast

(sound, etc.)

 

 

 

 

 

Perform sampling over a long time (weather,

 

 

etc.)

4(Extend)

Extended

• The EA-200 enters a power off sleep state

 

 

while standing by.

 

 

 

 

 

Sample sound using the EA-200’s built-in

6(g)1(Sound)

Sound

microphone

 

 

Record the time of the occurrence of a particular

 

 

trigger event as an absolute value starting from

6(g)2(Clock)

Clock

0, which is the sampling start time

 

 

 

 

 

Perform periodic sampling, from a start trigger

6(g)3(Period)

Period

event to an end trigger event

 

 

 

 

 

Perform sampling other than that described

3(Norm)

Normal

above

 

 

20100801