kCopying DatauTo copy from main memory to storage memory

The following procedure saves the selected data into a single file. You assign a name to the file, which is stored in storage memory.

1.On the main memory information screen, select the data you want to copy.

2.Press 2(COPY).

This displays the folder selection screen. “ROOT” is the storage memory root directory.

3.Specify the folder you want.

Highlight ROOT to copy the data to the root directory.

To copy the data to a specific folder, use f and c to move the highlighting to the desired folder and then press 1(OPEN).

4.Press 1(SAVE AS).

This displays the file name input screen.

5.Input the file name you want to give to the file.

To cancel the copy operation, press J.

6.Press 5(g3m) or 6(g2m) as required to specify the file format.

g3m is the fx-CG10/fx-CG20 file type. g2m is the file format used to transfer data to the fx-9860GIIand other older model calculators via Program-Link Software (FA-124).

7.Press w to copy the data.

The message “Complete!” appears when the copy operation is complete.

11-8