uTo maneuver between the Picture Plot screen, AXTRANS screen, and plot list screen

Once you display the plot list screen and AXTRANS screen (page 15-14), each press of !6(GT) cycles between the Picture Plot screen, AXTRANS screen, and plot list screen.

!6(GT)

!6(GT)

!6(GT)

kAdjusting the Lightness (Fade I/O) of an Image

You can adjust the lightness of an image within a range of 0% (as-is) to 100% (not displayed). A higher setting value makes the image lighter, and a setting of 100% displays all white.

You can adjust the lightness for optimum viewing of plots and graphs.

Note that the lightness setting can be adjusted only when the image is a 16-bit image data.

After you adjust the lightness level, the setting is stored in the image file when you perform either of the following operations: K1(FILE)2(SAVE) or 3(SAVE AS).

uTo adjust the lightness (Fade I/O) of an image

1.While the Picture Plot screen is displayed, press K6(g)6(g)3(FadeI/O).

This causes a slider for adjusting image lightness to appear on the display.

2.Use d and e to adjust the lightness value.

You can also input values directly, if you want. To specify a lightness value of 20%, for example, press caw.

3.After the setting is the way you want, press w.

15-12