4. Using the Plot List

Each plot on the Picture Plot screen has coordinate value data. You can use the plot list to display and edit these coordinates.

kDisplaying Coordinate Values of Plots (Plot List)

You can use the procedures in this section to display a list of plot coordinates (X, Y), and use the list to edit values, delete plot data, and change plot colors. You also can specify a time value (T) for each plot and draw a T-X or T-Y graph (AXTRANS) function.

uTo edit plot coordinate values

1.While the Picture Plot screen is displayed, press K3(List) to display the plot list screen.

The X and Y values of the plot list screen show plot coordinates. The T-value indicates time. (For more information about T-values, see “Displaying Plots on T-Y Coordinates and T-X Coordinates (AXTRANS Screen)” on page 15-14.) On this screen you can edit the X and Y values only.

2.Use the cursor keys to move the highlighting to the X-column or Y-column value you want to edit and then press 2(EDIT).

3.Edit the values and then press w.

If you want to edit other values, repeat steps 2 and 3.

To return to the Picture Plot screen, press J or !J(QUIT).

Changing a value cause the change to be reflected by the corresponding plot on the Picture Plot screen.

Note

While the plot list screen is displayed, you can use 6(g)4(STORE) to store list data on the plot list to list memory and 6(g)5(RECALL) to recall plot list data from list memory. Note, however, that both the store and recall operations ignore any color information associated with list data.

15-13