Casio fx-CG20 kSaving Graph Screen Contents as an Image (g3p File), uTo save a graph screen image to Picture Memory, uTo store a graph screen image under a file name

kSaving Graph Screen Contents as an Image (g3p File)

There are two methods that can be used to save a g3p file.

•Saving to Picture Memory

This method lets you assign a number from 1 to 20 to an image when you save it. It stores the image in the storage memory’s PICT folder as a file with a name from Pict01.g3p through Pict20.g3p.

•Saving under an Assigned Name

This method saves the image in the folder you want in storage memory. You can assign a file name up to eight characters long.

Important!

•A dual graph screen or any other type of graph that uses a split screen cannot be saved in picture memory.

uTo save a graph screen image to Picture Memory

1.While the graph screen is on the display, press K1(PICTURE)1(STORE)1(1-20).

2.On the Store In Picture Memory screen that appears, enter a value from 1 to 20 and then press w.

•There are 20 picture memories numbered Pict 1 to Pict 20.

•Storing an image in a memory area that already contains an image replaces the existing image with the new one.

uTo store a graph screen image under a file name

1.While the graph screen is on the display, press K1(PICTURE)1(STORE) 2(SAVE • AS).

•This displays a folder selection screen.

2.Select the folder where you want to save the image.

•To store the image in the root directory, highlight “ROOT”.

5-21