kInputting a List into a Calculation

There are three methods you can use to input a list into a calculation.

Specification of the list number of a list created with List Editor.

Specification of the sub name of a list created with List Editor.

Direct input of a list of values.

uTo specify the list number of a list created with List Editor

1. In the Run-Matrixmode, perform the following key operation. AK1(LIST)1(List)

• Enter the “List” command.

2. Enter the list number (integer from 1 to 26) you want to specify.

uTo specify the sub name of a list created with List Editor

1. In the Run-Matrixmode, perform the following key operation. AK1(LIST)1(List)

• Enter the “List” command.

2. Enter the sub name of the list you want to specify, enclosed in double quotes (” ”).

Example: ”QTY”

uTo directly input a list of values

You can also directly input a list of values using {, }, and ,.

Example

To input the list: 56, 82, 64

!*( { )fg,ic,

ge!/( } )

3-14