3.Press x or perform the following operation: 2(Edit) – 4:Select Figure.

• This selects the entire object.

uTo deselect a particular object

1.If any tool icon is in the upper right corner of the screen, press J or o to deselect the tool.

2.Move the pointer close to the object you want to deselect.

This will cause the k marks to become highlighted. At this time the object will begin to flash. Note that the object will not flash if it is a point and a mark is displayed on the point.

3. Press w.

• This will deselect the object, which causes the k mark(s) to disappear.

uTo select all objects on the screen

Perform the following operation: 2(Edit) – 2:Select All.

uTo deselect all objects on the screen

Press o or perform the following operation: 2(Edit) – 3:Deselect All.

14-20