ε-10

Using Advanced Setup

3.What you need to do next depends on the currently selected channel.

• CH1, CH2, or CH3

Press a function key to display a menu of sensors that can be assigned to the selected channel.

1(CASIO)..............

Displays a menu of CASIO sensors.

2(VERNIR) ...........

Displays a menu of Vernier sensors.

3(CUSTOM) .........

Displays a menu of custom probes.

4(None) ................

Press this key when you want leave the channel without any

 

sensor assigned to it.

•SONIC Channel

Press a function key to display a menu of sensors that can be assigned to this channel.

1(CASIO)..............

Displays a menu of CASIO sensors, but only “Motion” can be

 

selected.

2(VERNIR) ...........

Displays a menu of Vernier sensors. You can select “Motion” or

 

“Photogate”.

Note

•On the menu that appears after you select “Motion” from either the CASIO or Vernier sensor menu, select either “meters” or “feet” as the sampling unit.

•After selecting “Motion” from either the CASIO or Vernier sensor menu, you can press the K key to toggle “smoothing (correction of measurement error)” on (“-Smooth” displayed) and off (“-Smooth” not displayed).

•From the menu that appears after you select “Photogate” as the sensor, select [Gate] or [Pulley].

[Gate] ...............

Select this option when using the PhotoGate sensor alone.

[Pulley] .............

Select this option when using the PhotoGate sensor along with a

 

smart pulley.

4(None) ................

Select this option to disable the SONIC channel.

•Mic Channel

For this channel, the sensor is automatically set to Built-in (External) Microphone. However, you need to configure the settings described below.

1(Sound)

..............Select this option to record elapsed time and volume 2-

 

dimensional sampled sound data (elapsed time on the horizontal

 

axis, volume on the vertical axis).

2(FFT) ..................

Select this option to record frequency and volume 2-dimensional

 

sampled sound data (frequency on the horizontal axis, volume on

 

the vertical axis).

4(None) ................

Select this option to disable the Mic channel.

4.Repeat steps 2 and 3 as many times as necessary to configure all the channels you want.

5.After all the settings are the way you want, press w.

• This returns to the Advanced Setup menu.

20100801