6500 Disk Array User’s Guide 21020690 B
Chapter 3 Display/Operation Panel
ARRAY OPTIONS Page 3 - 11
ARRAY OPTIONS
From , use the left/right arrow keys to select
(see “Menu Structure (1 of 5—Array Options)” on page 3-6 and
“Menu Structure (2 of 5—Array Options)” on page 3-7). Array opti ons include:
ON/OFF LINE When ON LINE, the array is ready to receive commands from the system it is
connected to.Take the array OFF LINE if you want t o prevent user access while
performing a rebuild or other maintenance.
SCSI ID Each device on the SCSI bus must have a unique ID. This option allows you
to set the array's SCSI ID from 0 to 15. This is typically set to 0 unless multiple
arrays are daisy-chained together or the ID of the host SCSI port is zero.
OPTION DEFAULT SETTING
ON/OFF LINE ON LINE (or assigne d array
name)
SCSI ID 0
PASSWORD (none)
UNIT ATTENTION ON
WRITE PROTECT OFF
ALARM ON
SET DEFAULTS NO
RPT AS RECOVER OFF
TEMP WARNING 45 degrees C
TEMP CRITICAL ON
AUTO MEGOMETER OFF
ARRAY NAME (blank)
Table 2: Array Options