Ciprico 6500 manual 1250$7,21

	information:),50:&7)81&7,2150:$1,7,*O0(03(53$$&,<5($$),50:25785(6(/(&7,1)250$6(162565($7,21
Chapter 3 Display/Operation Panel
ARRAY INFORMATION	,1)250$7,21			Page 3 - 15
ARRAY	From	use the left/right arrow keys to		select $55$<
INFORMATION		see “Menu Structure (3 of 5—Array Info & Rebuild)” on page
	3-8). These display-only selections let you view the following array
FIRMWARE	The )	menu gives you access to three firmware parameters: firmware
	revision&+(&.6806level (	5(9); the results of a checksum test (7(67
	); and a display of the hexadecimal tallies of the checksum test
	(	.
	FIRMWARE REV
	Displays the revision level of the firmware residing in the array’s firmware
	PROM device. Two submenus display the date and time associated with the
	firmware revision, and a third submenu displays the model number of the array.
	TEST CHECKSUMS
	This item and its submenu display, as 3$66or		the results of a test in
	which expected checksums are compared to actual calculated checksums of the
	current contents of the Primary (PR) firmware buffers, and the BIST buffer.
	Matching checksums for a buffer verify that the contents of that buffer have
	not changed and it passes the test.
	DISP CHECKSUMS
	This item is similar to the 7(67&+(&.6806item except that, instead of
	showing',63&+(&.6806a 3$66or )$,/ condition, the actual checksums are displayed in
	hexadecimal. Two submenu items are associated)with$,/',63 &+(&.6806. In
	the second submenu item, there are four entries: at the upper left, the expected
	checksum from the primary buffer appears; at the lower left, the calculated
	checksum for the primary buffer is shown; at the upper right, the expected BIST
	checksum appears; and at the lower right, the calculated BIST checksum
	appears.
TEMP	Displays the temperature detected by the sensor (on the controller board) in
SENSOR	degrees Celsius and Fahrenheit.

6500 Disk Array User’s Guide 21020690 B