Ciprico 6500 manual Rebuild Data REBUILD%

REBUILD

Chapter 3 Display/Operation Panel

Page 3 - 18

REBUILD

REBUILD

DATA

REBUILD%

page 3-8). Use the display/operation panel rebuild options listed below as described in Chapter 4 of this guide.

From5(%8,/')81&7,216(/(&75(%8,/'use the left/right arrow keys to select the following functions (see “Menu Structure (3 of 5—Array Info & Rebuild)” on

Caution If a disk in the array fails, replace the drive and perform a rebuild as soon as possible. A rebuild can be performed without taking the array off-line. See Chapter 4 for drive replacement and rebuild instructions.

Your selection for the'$7$parameter determines whether or not the data from the failed drive will be reconstructed on the new replacement disk drive. 21means the data will be rebuilt; 2))means the data will not be rebuilt.

Caution '$7$21should always be selected for a data rebuild. Rebuilding with this selection 2))may result in data corruption and/or inter- drive parity errors.

This menu selection allows you to select the percentage of processing time the array will dedicate to the rebuilding process: ￿￿￿￿￿￿￿, or ￿￿￿. The lower the percentage, the longer the rebuild will take. The default setting is ￿￿￿.

START This selection must be set to <(6before you press SELECT to rebuild a drive.

21020690 B 6500 Disk Array User’s Guide